This HO scale Block Signal is part of a prototypical system that a provides the ability to have a fully integrated Block Detection system when used in conjunction with detectors.
It is designed to be used with and is fully compatible with the Lamplighter™ FL animation unit using software rev E5 and higher. It comes 2 of 1mm fibers attached to it.
To mount the unit, just drill a 1/8" hole in the layout, insert the fibers and then the tubing to the desired depth. The size of this hole will provide a snug fit for the Block Signal post, keeping it from swiveling around.
The integration of the Block Signal with the detectors is shown in the block diagram below.
See the Detector units that are available and compatible with the Lamplighter FL unit.
Use two adjacent Light Ports to connect the fibers to.
Up to 8 paired Block signals can be used in one Lamplighter or 4 individually controlled block signals.
- Height: 2 3/4” (70mm)
- Width of Signal: 6.7mm
- Diameter of Fiber: 1mm
- Stub: 12mm
- Lenght of Fiber: 5+ft